iSTA Breeze 48V 2000W Hybrid Charge Controller

 

 

  • Yeni Kontroller 1
  • Yeni Kontroller 2
  • Yeni Kontroller 1
  • Yeni Kontroller 2


Product Description: 

 

The Wind / Solar Hybrid Charge Controller from IstaBreeze® is an intelligent controller of the wind turbine and solar cells that controls you at the same time. The high-end device can also be used as a monitoring system. It is used to safely and efficiently charge and control your battery with the Wind Generator / Solar Module combination.

With its discreet appearance, simple operation, with integrated protection functions, this device has high efficiency and low no-load losses. This version of the controller will significantly increase the life and stability of the whole system, especially the batteries.

In addition, the control electronics in the control cabinet monitors system voltage and brakes the wind turbine when reaching a max. Overvoltage.

The special features and product information are listed below:

Use of external and high quality (Triacs & Hyper Mosfet), solid state components. Increasing the life of the controller.

Microprocessor controlled charge with integrated voltage and current limiting.

Electromagnetic brake control.

Integrated 3-phase short-circuit switches (brake switch)

Protection against lightning strikes.

Protection against overcharging, deep discharge, short circuit, overload and against incorrect reverse polarity.

Integrated display.

The generator is automatically braked gently when the battery is full, modern braking system with external load resistance (Dump Load) to avoid immediate blockage of the turbine. Increasing the life of the stator.

 

 

 

 

 


 

PRODUCT SPECIFICATIONS
Battery Voltage Minimum
42V
Cable
10 qmm screw terminals
Charging Current PV aMPERE mAX.Rated Capacity
10 A
Charging Current wind amperes max.
33 A
Charging Voltage
52.8 V
Cooling
External Aluminum cooling fins
Display
Lcd with 6 displays Amper, Watts, Rpm, Battery Voltage, Volts, Temperature
Dump Load
2 kw braking resistor (3.6 ohms). The load resistor can deviate from the picture.
Integared Manual Stop Switch
Maintenance
Protection Class
IP20 (inside area)
Nominal Battery Voltage
48 VDC
Max.Input Power of Wind Turbine
2 KW
Max. Input Power of PV Modul
300 W
Braking function ( Electromagnetic short-circuit)
From 59.4 Volt
Operating Temperature 
Normal: 20~+55°C/35~85%RH Industrial: 30~+55°C/35~85%RH
Temperature Compensation
  -4mV°C/2V, -35°C-- +80°C, Accuracy: ±1°C
Measurements  LxWxH
  300x400x200 mm
Weight
  6.5 kg
Recommended Battery Min.
  Acid & Gel